Tech Drawings

Need help or want to hear about latest Tech stuff? It's probably in here!

Moderator: Claw

Post Reply
Trig
GSV Spammer
Posts: 4555
Joined: Thu Aug 24, 2006 6:18 pm
Contact:

Post by Trig »

Need something to just do basic line drawings, nothing massive just A4 kinda stuff.
mcmav
GSV Regular
Posts: 517
Joined: Thu Aug 24, 2006 6:01 pm
Contact:

Post by mcmav »

pen and paper + ruler then.
shat_kat
Advanced Member
Posts: 53
Joined: Thu Aug 24, 2006 7:43 pm
Contact:

Post by shat_kat »

i concur, but maybe a mechanical pencil aswell.
Last edited by shat_kat on Tue Aug 29, 2006 4:13 pm, edited 1 time in total.
Nellyboy
GSV Spammer
Posts: 1872
Joined: Sat Aug 26, 2006 12:12 pm
Contact:

Post by Nellyboy »

You mean a copy of photoshop and a wacom pad?
Image
ze1ro
Member
Posts: 26
Joined: Thu Aug 24, 2006 7:37 pm
Contact:

Post by ze1ro »

there's autosketch 9.0 about an 1/8th of the price of autocadLT 7.0 but does most of the same stuff.
Human-Shield
Advanced Member
Posts: 74
Joined: Wed Sep 06, 2006 6:47 pm
Contact:

Post by Human-Shield »

Hi,

Depends on what your after chap. I use autocad for most of my linework. What are you after? I mught be able to put a couple of drawings together for you if it helps. Will cost a beer or two though.
Turts
GSV Regular
Posts: 837
Joined: Fri Aug 25, 2006 9:15 pm
Contact:

Post by Turts »

Better off with Etch a sketch tbh Trig ... Shields about as much use as a fish with boobies ;)
Human-Shield
Advanced Member
Posts: 74
Joined: Wed Sep 06, 2006 6:47 pm
Contact:

Post by Human-Shield »

Turts wrote: Better off with Etch a sketch tbh Trig ... Shields about as much use as a fish with boobies ;)

Well a fish with boobies would have quite a good entertainment value imo :) Other than that being a "properly" trained drafty and design engineer does help when it comes to technical drawings turt. However im sure etch a sketch would prove very usefull for drawing the big old school cock trigs after :)
Turts
GSV Regular
Posts: 837
Joined: Fri Aug 25, 2006 9:15 pm
Contact:

Post by Turts »

Human-Shield wrote: Well a fish with boobies would have quite a good entertainment value imo :) Other than that being a "properly" trained drafty and design engineer does help when it comes to technical drawings turt. However im sure etch a sketch would prove very usefull for drawing the big old school cock trigs after :)

10/10 As ever 100% correct and still a funneh man Andy ;)
Human-Shield
Advanced Member
Posts: 74
Joined: Wed Sep 06, 2006 6:47 pm
Contact:

Post by Human-Shield »

Turts wrote: 10/10 As ever 100% correct and still a funneh man Andy ;)
Yea well i try. Troubble is i find myself funny and its never a good look when you laugh and your fat wobbles :(



On a similar note, If anyone is after any engineering drawings / models producing im allways willing to help. Or if your after that house extension and live anywhere near, I've got a good contact for drawing some plans up :)
mcmav
GSV Regular
Posts: 517
Joined: Thu Aug 24, 2006 6:01 pm
Contact:

Post by mcmav »

Trig will probs be after a dog house for himself and his fat barsteward dogs :P

Although seeing as he's a bit of a girl maybe a Wendy house would be a better option :)
Last edited by mcmav on Sun Sep 17, 2006 6:46 pm, edited 1 time in total.
Post Reply